Use a grounded wrist strap or touch a safely grounded object or discharge any static electricity by touching the metal surface of the system chassis. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. Refer to Table 1 for details. Carefully insert the CPU into the socket until it fits in place. If you are using any other operating systems, disable the Hyper-Threading Technology item in BIOS to ensure system stability and performance. Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug.
|Date Added:||3 December 2016|
|File Size:||11.39 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Intel ASUS X Series P4PE2-X Motherboard REV (ASUSP4PE2XUAYZREV) |
If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins. Note the notches on the card golden fingers to ensure that they fit the AGP slot on the motherboard.
When lit, this green LED indicates that the system is ON, in sleep mode, or in soft-off mode, a reminder audjo you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. saus
The minimum recommended wattage is W, or W for a fully configured system. The CPU fits only in one correct orientation.
Information to prevent damage to the components when trying to complete a task. Canadian Department of Communications Statement This asuus apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Failure to do so may cause severe damage to the motherboard and other system components. CPU Parameter Recall feature. If you detect any damage, contact your dealer immediately. This Line In light blue jack connects a tape player or other audio sources.
Otherwise, conflicts arise between the two PCI groups making the system unstable and the card inoperable. Long AGP cards when installed may interfere with memory socket.
The LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
p4pe2x When the system hangs due to overclocking, C. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.
ASUS P4PE2-X Free Driver Download (Official)
You may install the USB module in the chassis front panel. These devices could interrupt the grounding circuit. In 6-channel mode, the function of this jack becomes Rear Speaker Out. Turn on the system and change the necessary BIOS settings, if any.
ASUS P4PE2-X SoundMAX Integrated Digital Audio driver download free (ver. 0.9.1)
No need to use a DOS-based utility or boot from a floppy disk. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
This mark aus match a specific corner on the socket to ensure correct aueio. Take note of the specific connector colors as described. Unlock a DIMM socket by pressing the retaining clips outward. Product warranty or service will not be extended if: The plugs from the power supply are designed to fit these connectors in only one orientation. After connecting one end to the motherboard, connect the other end to the floppy drive.
This prevents incorrect orientation when you connect the cables. This requires an external detection mechanism such as a chassis intrusion sensor or xudio.
Follow the hard disk drive documentation when setting the device in master p4p2e-x slave mode. Operation is subject to the following two conditions: Refer to Table 1 for details. Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.